In order to attach the Flaps, we first need to (re)install the Ailerons, to be able to align the Flaps. Especially the lateral adjustment with the washers is important. Once the Aileron is set, I use an Aluminum angle to align the Flap. First I drilled the outboard and inboard […]
Finally found some time again to continue with the Flaps. After fitting, drilling, deburring and priming, I can now start with the assembly and riveting. Here’s the right bottom skin with the ribs riveted to the bottom skin and the bend in the skin that serves as the rear spar […]
While working on finalizing the wings, I interjected the work with preparing the flaps. Main reason is that for closing the wings, it is really handy to work with two people on it. So when my dad is not available, I work on the flaps. This results in about 7 […]
With the top skin riveted to the right wing, I started attaching the Aileron brackets, the aileron fairing and the flap brace. I also worked on the push rods. Scuffing the 167 cm Aluminum push rods with Scotch Brite pad results in beautiful push rods and great hands. I love […]